South Boston Police Department terminals

This page presents the content of the terminals within the South Boston Police Department as is in game.

South Boston Police Evidence Terminal[]

Note: This desk terminal is located on the receptionists desk.

SOUTH BOSTON PD EVIDENCE TERMINAL
No Internal Investigations Since: FILE NOT FOUND

CASE 114-GTA: Connelly Grand Theft Auto Logs[]

CASE 114-GTA: Connelly Grand Theft Auto Logs

EVIDENCE LOG ENTRY: NiCo-00
OBJECT: 1x set of fingerprints, matching prints of suspect Nicole Connelly, taken from vehicle
STATUS: In evidence, South Boston cabinet B02.

EVIDENCE LOG ENTRY: NiCo-01
OBJECT: 1x vehicle registration, issued to "Nicole Connell"
STATUS: In evidence, South Boston cabinet B02.
NOTE: Attempts to contact Ms. Connell regarding theft unsuccessful. Will attempt again 10/23.

CASE 155-H: Winter Holotape Logs[]

CASE 155-H: Winter Holotape Logs

EVIDENCE LOG ENTRY: EdWi-03
OBJECT: Holotape 03
STATUS: On loan, Quincy Police. Officer Hart, point of contact.

EVIDENCE LOG ENTRY: EdWi-05
OBJECT: Holotape 05
STATUS: Requisitioned by Deputy Gold, Nahant Sheriff Dept., 10/18/77.

EVIDENCE LOG ENTRY: EdWi-07
OBJECT: Holotape 07
STATUS: Checked out to Officer Doyle, South Boston PD, 10/22/77.

CASE 189-RE: Caldwell Reckless Endangerment Logs[]

CASE 189-RE: Caldwell Reckless Endangerment Logs

EVIDENCE LOG ENTRY: HeCa-00
OBJECT: 1x "100% Grognak-Authenticity-Society-Certified" Loin cloth
STATUS: Returned to Mr. Caldwell.

EVIDENCE LOG ENTRY: HeCa-01
OBJECT: 1x "100% Grognak-Authenticity-Society-Certified" Battle axe
STATUS: Returned to Mr. Caldwell.

CASE 247-AB: Vincent Assault/Battery Logs[]

CASE 247-AB: Vincent Assault/Battery Logs

EVIDENCE LOG ENTRY: JaVi-00
OBJECT: 1x photograph collection of victim
STATUS: On loan, State Prosecutor's Office. Angela Hammett, point of contact.

EVIDENCE LOG ENTRY: JaVi-01
OBJECT: 2x brass knuckles
STATUS: On loan, State Prosecutor's Office.

EVIDENCE LOG ENTRY: JaVi-02
OBJECT: 1x baseball bat
STATUS: On loan, State Prosecutor's Office.

CASE 385-AR: Duncan Armed Robbery Logs[]

CASE 385-AR: Duncan Armed Robbery Logs

EVIDENCE LOG ENTRY: RoDu-00
OBJECT: 1x tape, surveillance footage, taken from Commonwealth Savings and Loan
STATUS: In evidence, South Boston cabinet E14.

EVIDENCE LOG ENTRY: RoDu-01
OBJECT: 1x 10mm pistol, recovered from suspect
STATUS: In evidence, South Boston cabinet E14.

EVIDENCE LOG ENTRY: RoDu-02
OBJECT: 1x gas mask, recovered from suspect
STATUS: In evidence, South Boston cabinet E14.

CASE 416-Hm: Garatto Homicide Logs[]

CASE 416-Hm: Garatto Homicide Logs

EVIDENCE LOG ENTRY: AnGa-00
OBJECT: 1x photograph collection, taken of scene
STATUS: In evidence, South Boston cabinet JJ7.

EVIDENCE LOG ENTRY: AnGa-01
OBJECT: 1x splatter report
STATUS: In evidence, South Boston cabinet JJ7.

EVIDENCE LOG ENTRY: AnGa-02
OBJECT: 1x baseball bat, Swatter, limited edition
STATUS: On loan, South Boston Softball Squad.

Terminal[]

Note: This desk terminal is located on the desk next to the jail cell. It is locked Expert.

Welcome to ROBCO Industries (TM) Termlink

The following section is transcluded from Remote door control terminal (Fallout 4). To modify, please edit the source page.

> Remote Door Control[]

Note: This is the default header for the remote door program.

Remote Door Control Interface
STATUS: Closed

Note: This is the header once the remote door is opened.

Remote Door Control Interface
STATUS: Open

Open Door[]

Opening doors...

> Accessing Door...

Close Door[]

Sealing doors...

> Initializing Door...

Terminal[]

Note: This wall terminal is located in the western corner of the second floor next to the protectron pod. It is locked Novice.

Welcome to ROBCO Industries (TM) Termlink

The following section is transcluded from Protectron terminal (Fallout 4). To modify, please edit the source page.

> Protectron Control[]

Note: This is the default header of the command program.

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is active.

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

> Loading Interface...

Note: This is the header of the command program once the Protectron(s) is xxxxx.

Standard Protectron Control Interface v2.40

This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.

STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal

Please choose an option:

> Loading Interface...

Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.

! ERROR ! !
Protectron unit absent or damaged!

> Loading Interface...

Activate Unit(s)[]

Note: This is the default command of the command program.

...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...

Please advise any personnel standing near charge pod to make way.

> Exiting Charge Pod

Shut-Down Unit(s)[]

Note: This command is available once the Protectron(s) are activated.

...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...

Please ensure that Charge Pod is unobstructed.

> Returning to Charge Pod