This page contains all Jamaica Plain terminals in Fallout 4.
Terminal[]
Note: This wall terminal is located within the hardware store, nest to the protectron pods. It is locked Novice.
Welcome to ROBCO Industries (TM) Termlink
> Protectron Control[]
Note: This is the default header of the command program.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is active.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is xxxxx.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.
! ERROR ! !
Protectron unit absent or damaged!
> Loading Interface...
Activate Unit(s)[]
Note: This is the default command of the command program.
...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...
Please advise any personnel standing near charge pod to make way.
> Exiting Charge Pod
Shut-Down Unit(s)[]
Note: This command is available once the Protectron(s) are activated.
...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...
Please ensure that Charge Pod is unobstructed.
> Returning to Charge Pod
Choose Personality Mode[]
> Loading Personality Matrices...
Default[]
Personality paramenter reset.
> Resetting Personality Parameter...
Subway Steward[]
Personality paramenter reset.
> Resetting Personality Parameter...
Law Enforcement[]
Personality paramenter reset.
> Resetting Personality Parameter...
Fire Brigadier[]
Personality paramenter reset.
> Resetting Personality Parameter...
Medical Responder[]
Personality paramenter reset.
> Resetting Personality Parameter...
Construction Worker[]
Personality paramenter reset.
> Resetting Personality Parameter...
Mayor's Terminal[]
Note: This desk terminal is located on the desk in the Mayor's office. It is locked Expert.
Welcome to ROBCO Industries (TM) Termlink
Jamaica Plain - Mayor Alyssa Park
Treasures Exhibit Speech[]
Treasures Exhibit Closing Speech - Draft 4
Friends, neighbors, and honored guests,
We are gathered here today to commemmorate the Treasures of Jamaica Plain. Though ours may be a small community, it is rich in history. Rich in culture. Rich in memory. And for the sake of those memories, we commit these treasures to the earth, that future generations might look back and remember where we stood, and see how far they have come.
[Invocation - Pastor Warren]
[Sealing Ceremony]
[Potluck Dinner, South Lawn]
Budget Statement[]
Jamaica Plain Township Budget
2077 Fiscal Year (10/1/76-10/1/77)
--Revenue--
Property Taxes: $190.49m
Income Tax: $87.16m
Revenue Sharing: $148.87m
Licenses, Fees, & Charges: $136.09m
TOTAL: $562.61m
--Expenses--
Salaries & Benefits: $291.68m
Operating Expenses: $169.01m
Maintainence Fund: $75.36m
Treasures Exhibit Special Funding: $38.79m
TOTAL: $574.84m
Security Terminal[]
- Creation Kit ID
- DN070_TerminalSecurity01
WARNING: This Protectron has been set to MAXIMUM SECURITY mode. Any targets failing visual authentication will be engaged with lethal force.
> Safe Control[]
Note: This is the default header for the safe program.
Safe Lock Mechanism Status: Locked
> Accessing Safe Functions...
Note: This is the header once the safe is unlocked.
Safe Lock Mechanism Status: Unlocked
> Accessing Safe Functions...
Disengage Lock[]
...Checking Clearance..........
...AUTHORIZED.................
...Locking Mechanism Disable..
> Accessing Safe Functions...
Engage Lock[]
...Checking Clearance..........
...AUTHORIZED.................
...Locking Mechanism Enable...
> Accessing Safe Functions...
Janitor's Terminal[]
Note: This desk terminal is located on the desk in the janitor's office.
Welcome to ROBCO Industries (TM) Termlink
Jamaica Plain - Janitor's Office
FACILITIES STATUS
Electrical: *ERROR* - Emergency mode only.
HVAC: *ERROR* - Ventilation breach detected.
Treasures: Operating normally on reserve power.
Facilities Logs[]
Please select a log file to view.
7/31/77[]
7/31/77
Council finally approved renovations to the basement. Took them long enough. Be nice to get rid of these leaky old pipes, maybe replace the A/C so it doesn't flake out every day it gets above ninety. Sick of fixing the darn thing.
8/22/77[]
9/20/77
Got called up to fix a light in the breakroom. The whole staff was waiting-- turns out today's my twenty-fifth anniversary with the city. I'd almost forgot. Had a cake for me and everything.
Hard to believe I've spent all those years down here in the basement. Well, once the renovations are done, this old place should be a lot nicer.
9/12/77[]
9/12/77
The mayor's out of her mind. All the renovation money's being diverted into her pet project-- that ridiculous 'Treasures' thing. Just today, they ripped out my storage room and started laying in marble floors. Craziest thing I ever saw. What's she going to keep in there, gold bars?
9/28/77[]
9/28/77
I swear, this mess gets worse by the day. They keep badgering me to help with the project, but I don't want none of it.
It's hard enough just to keep the place running as it is. First cold day of fall, and the heating system completely shorts out. I got plenty of complaints, but at least the temps weren't too bad. Give it another month or two, and they'll wish they'd spent some of that money on maintainence.
10/4/77[]
10/4/77
Last week, it was Protectrons. Today, they had me set up some highfalutin laser security system. Thing's touchy as all hell. Damn near killed me.
I don't get it. They've taken over half the basement with this fool thing, but they still can't be bothered to shore up the ceiling or fix the damn plumbing. All that work won't matter much if the whole building collapses on top of it. I can't believe the council's going along with this.
10/18/77[]
10/18/77
Treasures had all of three visitors today. Surprised there were that many-- figured the security screenings would keep them all away. The Mayor tried to put a good face on it for the council, but the city's wasted so much money on this boondoggle, I'd be amazed if we don't impeach the lot of them.
For now, I'll just try to keep the pipes patched up and the tourists out of my office.
10/23/77[]
10/23/77
I heard it. It's bad outside now, real bad. Kinda puts everything in perspective, don't it?
There won't be a ceremony tonight. Mayor's probably already dead. I'm going to close up the Treasures, then try to get out of here. Still the damndest thing I've ever seen, but... maybe it'll mean something to someone, someday.
Terminal[]
Note: This wall terminal is located within the security checkpoint room, nest to the southern protectron pod. It is locked Expert.
Welcome to ROBCO Industries (TM) Termlink
Jamaica Plain - Security Terminal #1
WARNING: This Protectron has been set to MAXIMUM SECURITY mode. Any targets failing visual authentication will be engaged with lethal force.
> Protectron Control[]
Note: This is the default header of the command program.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is active.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is xxxxx.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.
! ERROR ! !
Protectron unit absent or damaged!
> Loading Interface...
Activate Unit(s)[]
Note: This is the default command of the command program.
...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...
Please advise any personnel standing near charge pod to make way.
> Exiting Charge Pod
Shut-Down Unit(s)[]
Note: This command is available once the Protectron(s) are activated.
...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...
Please ensure that Charge Pod is unobstructed.
> Returning to Charge Pod
Choose Personality Mode[]
> Loading Personality Matrices...
Default[]
Personality paramenter reset.
> Resetting Personality Parameter...
Subway Steward[]
Personality paramenter reset.
> Resetting Personality Parameter...
Law Enforcement[]
Personality paramenter reset.
> Resetting Personality Parameter...
Fire Brigadier[]
Personality paramenter reset.
> Resetting Personality Parameter...
Medical Responder[]
Personality paramenter reset.
> Resetting Personality Parameter...
Construction Worker[]
Personality paramenter reset.
> Resetting Personality Parameter...
Terminal[]
Note: This wall terminal is located within the security checkpoint room, nest to the northern protectron pod. It is locked Expert.
Welcome to ROBCO Industries (TM) Termlink
Jamaica Plain - Security Terminal #2
WARNING: This Protectron has been set to MAXIMUM SECURITY mode. Any targets failing visual authentication will be engaged with lethal force.
> Protectron Control[]
Note: This is the default header of the command program.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is active.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is xxxxx.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.
! ERROR ! !
Protectron unit absent or damaged!
> Loading Interface...
Activate Unit(s)[]
Note: This is the default command of the command program.
...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...
Please advise any personnel standing near charge pod to make way.
> Exiting Charge Pod
Shut-Down Unit(s)[]
Note: This command is available once the Protectron(s) are activated.
...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...
Please ensure that Charge Pod is unobstructed.
> Returning to Charge Pod
Choose Personality Mode[]
> Loading Personality Matrices...
Default[]
Personality paramenter reset.
> Resetting Personality Parameter...
Subway Steward[]
Personality paramenter reset.
> Resetting Personality Parameter...
Law Enforcement[]
Personality paramenter reset.
> Resetting Personality Parameter...
Fire Brigadier[]
Personality paramenter reset.
> Resetting Personality Parameter...
Medical Responder[]
Personality paramenter reset.
> Resetting Personality Parameter...
Construction Worker[]
Personality paramenter reset.
> Resetting Personality Parameter...
Treasures Access Terminal[]
Note: This console terminal is located in front of the entrance to the treasures room. It is locked Novice.
Welcome to ROBCO Industries (TM) Termlink
Jamaica Plain - Treasures Access Terminal
Note: This header is displayed if the Mayor's ID card was used to access this terminal.
Welcome, User Alyssa Park.
Note: This header is displayed if the Sole Survivor hacked access to this terminal.
Welcome, $AUTHORIZED_USER.
- Creation Kit ID
- nativeSwitchDoorTerminal
> Security Door Control[]
- Creation Kit ID
- nativeSwitchDoorTerminalSubMenu
Note: This header is displayed if door(s) are locked.
MaxLock Security Door Control Interface
STATUS: Locked
Note: This header is displayed if the door is opening.
MaxLock Security Door Control Interface
STATUS: Busy
Note: This header is displayed if door(s) are unlocked.
MaxLock Security Door Control Interface
STATUS: Unlocked
Open Door[]
Note: This notice is displayed if the command opens a single door.
Security lock released. Opening doors...
> Accessing Maglocks...
Note: This notice is displayed if the command opens multiple doors.
Security locks released. Opening doors...
Close Door[]
Note: This notice is displayed if the command closes a single door.
Security lock engaged. Sealing doors...
Note: This notice is displayed if the command closes multiple doors.
Security locks engaged. Sealing doors...
> Initializing Maglocks...
Treasures Terminal[]
Note: This desk terminal is located on the xxxxx in the treasures room.
Welcome to ROBCO Industries (TM) Termlink
The Treasures of Jamaica Plain
This terminal has been provided to allow you to play the holotapes included in this exhibit. Please insert a holotape. It should play automatically.