This page presents the content of the terminals within the Four Leaf fishpacking plant as is in game.
Terminal[]
Note: This desk terminal is located on the desk at the western end of the min floor of the assembly line, next to the locked cage. It is locked Novice.
Welcome to ROBCO Industries (TM) Termlink
> Protectron Control[]
Note: This is the default header of the command program.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is active.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is xxxxx.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This header of the command program is displayed once the Protectron(s) is no longer within the protectron pod.
! ERROR ! !
Protectron unit absent or damaged!
> Loading Interface...
Activate Unit(s)[]
Note: This is the default command of the command program.
...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...
Please advise any personnel standing near charge pod to make way.
> Exiting Charge Pod
Shut-Down Unit(s)[]
Note: This command is available once the Protectron(s) are activated.
...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...
Please ensure that Charge Pod is unobstructed.
> Returning to Charge Pod
Choose Personality Mode[]
> Loading Personality Matrices...
Default[]
Personality paramenter reset.
> Resetting Personality Parameter...
Subway Steward[]
Personality paramenter reset.
> Resetting Personality Parameter...
Law Enforcement[]
Personality paramenter reset.
> Resetting Personality Parameter...
Fire Brigadier[]
Personality paramenter reset.
> Resetting Personality Parameter...
Medical Responder[]
Personality paramenter reset.
> Resetting Personality Parameter...
Construction Worker[]
Personality paramenter reset.
> Resetting Personality Parameter...
- Creation Kit ID
- nativeSwitchDoorTerminal
> Security Door Control[]
- Creation Kit ID
- nativeSwitchDoorTerminalSubMenu
Note: This header is displayed if door(s) are locked.
MaxLock Security Door Control Interface
STATUS: Locked
Note: This header is displayed if the door is opening.
MaxLock Security Door Control Interface
STATUS: Busy
Note: This header is displayed if door(s) are unlocked.
MaxLock Security Door Control Interface
STATUS: Unlocked
Open Door[]
Note: This notice is displayed if the command opens a single door.
Security lock released. Opening doors...
> Accessing Maglocks...
Note: This notice is displayed if the command opens multiple doors.
Security locks released. Opening doors...
Close Door[]
Note: This notice is displayed if the command closes a single door.
Security lock engaged. Sealing doors...
Note: This notice is displayed if the command closes multiple doors.
Security locks engaged. Sealing doors...
> Initializing Maglocks...
Terminal[]
Note: This wall terminal is located on the balcony above the main entrance of the facility. It is locked Master, although it can also be access with the Four Leaf security password.
Welcome to ROBCO Industries (TM) Termlink
==============================================
Four Leaf Fishpacking Security Terminal
==============================================
Open Security Door[]
Note: Accessing this command opens the hidden door to Marowski's Chem Lab.
Close Security Door[]
Note: Accessing this command closes the hidden door to Marowski's Chem Lab.
Terminal[]
Note: This wall terminal is located on the western wall of Marowski's Chem Lab.
Welcome to ROBCO Industries (TM) Termlink
> Remote Door Control[]
Note: This is the default header for the remote door program.
Remote Door Control Interface
STATUS: Closed
Note: This is the header once the remote door is opened.
Remote Door Control Interface
STATUS: Open
Open Door[]
Opening doors...
> Accessing Door...
Close Door[]
Sealing doors...
> Initializing Door...